Underfloor Heating Mat Installation Instructions-pl.jhheat.com

This instruction describes the simple steps to install the underfloor heating mat, ensuring safe and efficient use of the underfloor heating mat.

First, prepare the installation area: ensure the floor is clean, flat, dry and free of sharp objects that may damage the underfloor heating mat.

Unroll the underfloor heating mat carefully on the prepared floor, avoiding folding or twisting the mat to prevent internal cable damage.

Adjust the position of the underfloor heating mat to cover the entire area that needs heating, leaving a 5-10 cm gap from walls and furniture.

Secure the underfloor heating mat gently with double-sided tape or fixing clips to keep it flat and stable on the floor.

Check the underfloor heating mat for any damage or loose connections before proceeding to the next step.

Cover the underfloor heating mat with a thin layer of self-leveling cement, ensuring the mat is fully embedded and the surface is flat.

Wait for the cement to dry completely (usually 24-48 hours) before laying the final floor covering (such as tiles, wood or laminate).

Connect the underfloor heating mat to the thermostat according to the manufacturer’s instructions, ensuring correct wiring and good contact.

After installation, test the underfloor heating mat by turning on the thermostat to check if it heats up normally.

Note: Do not place heavy objects on the underfloor heating mat during installation or use to avoid damaging the cables.